Sandwich Penel Forming Line

Our sandwichd panel producing line has feasures of 1. nice appearence 2.high efficency 3.low noize 4. easy control.

sandwich panel product line

Main moter power	32KW
out line dimension of machine	33m*2.5m*2.5m
Total weight	14T
Processing speed	0-5m/min
the thickness of upper steell plate	0.3-0.8mm
the feeding width of upper steel plate	1000/1200
the thickness of lower steel plate	0.3-0.8mm
the feeding width of lower steel plate	1000/1200
material	EPS/rock wool
the thickness	50-250mm
the width of stocket board	950/1150mm
the width of H board	1000/1200mm
Terms:
1. Delivery: in stock
2. Package:Exporte Standard package for container
3. Payment:TT(30% by TT in advance ,70% by TT after inspect the machine we send you )
4. Validity: good for 30days

Product Feature: 1.A stylish and attractive design, giving the appearance of a traditional roof tile. 2. Resistant to frost, hail and gales; 100% waterproof , due to run-off channel on each sheet for several models. 3. The raw material can be in different color, with elegant and noble looking. It is widely used as the garden like factory, hotel, exhibition, villa, civil construction etc.

Components Of the machine:

The EPS sandwich panel line includes decoiler, main body and post-cut equipment. The laminating system consists of feeding, glue, heating, laminating and post-cutting.

Main Technical Parameters:

Sandwich Panel Spec

Panel width	950, 970mm
Panel thickness	50-200mm

  

Coil Steel Sheet Spec

thickness	0.4-0.7mm
width	1000mm, 1250mm
yieldstrength	Q235
Max coil weight	5000kgs

Whole Line Spec

working speed	0-5m/min (adjustable)
Total length	about 35m
Control mode	PLC
Total power	about 30kw
Electricty condition	380v/3p/50hz (or depend on custmers requirement)

structure and reasonable design, they won praise from same steel structure field because of the innovation constantly.

The sandwich panel production line can produce EPS sandwich panel and rock wool sandwich panel Variety of roofing panel shapes

Sandwich panel production line:

1.   General description:

This HIM-S-6 sandwich panel lamination line is designed to produce EPS and heat-insulation sandwich panel; Variety of roofing panel shapes with EPS core.

2.   Material

2.1 Steel sheets

2.1.1       facer sheets:

Color steel sheets: It is 0.2-0.6mm in thickness and 1250 mm or 1000 mm in width.

Steel coil inner diameter: 500mm, 600mm. For other specification, need to be equipped with coil clamp.

Steel coil weight: 3mt 5mt. epoxy galvanized layer; surface coating wont fall off after bending.

2.1.2       blanking plate:

Thickness: 0.2 0.6mm, width shows as following chart: (±1mm)

Plate thickness (mm)	Joint blanking plate(mm)		Tile blanking plate(mm)
	Protruding	Notch	Protruding	Notch
50	65	74	68	78
75	90	99	93	103
100	115	124	118	128

Steel coil: diameter 500 600mm, weight of coil is maximum 1.2 MT.

2.2 Core material

2.2.1       EPS material

Density is16kg/m3, tolerance of straightness is ≤1 mm/m and radian is ≤ 3mm/m.

Width: 1150± 1mm (for joint sandwich panel)

1200± 1mm (for H shape sandwich panel, roofing panel)

Unit length 5m, level off surface, tolerance is 1.5mm/m.

Thickness:

Panel thickness (mm)	50	75	100	150	200	250	300
EPS panel thickness(mm)	48	73	98	148	198	248	298

Material should be self extinguish, oxy index is 30.

Other standard of EPS panel should meet CB10801.

2.2.2       Mineral wool material:

Strip length 60mm, Vertical Arrange,

For glass wool, density is 64kg/m3,

For rock Wool, the density is 100kg/m3.

Width of insulation panel: (±1mm)

Panel shape	Width (mm)
1150 joint heat insulation sandwich panel	1135
950 joint heat insulation sandwich panel	935

Other standard refers to EPS.

2.3 Glue

Cohesive strength of PU glue 10n/cm2.

	Appearance	Cohesive force
A	Yellow sticky well proportioned liquid	ND 0.4 0.7 PA·S
B	Brown sticky well proportioned liquid	ND 0.3 0.6 PA·S
A: B = 1: 1.5.  Without impurity In room temperature, foaming time is 20 to 40 seconds. Solidification 50 to 70 seconds.

  

 

 

Material of main equipment:

Roller material: high grade NO.45 forged steel, plated hard chrome on the surface of roller with thickness 0.05mm.

Active shaft material: high grade NO.45 carbon wrought steel at diameter 72mm.

Cutting blade: Cr12 mould steel with quenched treatment.

They are widely used as the roof of garden like factory, hotel, exhibition center, villa, civil construction, etc.